A) Make sure your battery has enough voltage for the waterproof solar charge controller to recognize the battery type before first installation or adjusting
default parameter, only sufficient battery voltage can charge or activate the controller.
That means it won’t charge or activate when hooked to a dead or low-voltage battery, or connecting only with solar panel but without battery.
B) The battery cable should be as short as possible to minimize loss.
C) The regulator is only suitable for lead acid batteries: OPEN,AGM, GEL It is not suited for nickel metal hydride, lithium ions or other batteries.
D) The charge regulator is only suitable for regulating solar panels. Never connect another charging source to the charge regulator.
How to connect solar system with the controller:
Step 1: Connect the battery to the solar charge controller firstly- plus and minus.(it will auto adapts to the battery voltage)
Step 2: Connect the load to the controller secondly.
Step 3: Connect the solar panel to the controller finally – plus and minus.
♥ Note: The reverse order applies when deinstalling.
◆ Color: Black
◆ Rated Charging Current:10A
◆ Rated Discharging Current:10A
◆ Max Solar Input Voltage: ＜50V
◆ System Voltage:12V/24V Auto Adapt
◆ Self consume: ＜10mA
◆ Operating Temperature: -20 ~ +60℃
◆ Equalize Charging Voltage:14.4V/28.8V
◆ Bulk Charging Voltage:14.2V/28.4V
◆ Float Charging:13.8V/27.6V
◆ Discharge Stop Voltage:11.2V/22.4V
◆ Discharge Reconnect Voltage:12.6V/25.2V
◆ Housing: Aluminum Alloy
◆ Maximum Wire Size:16AWG
◆ Size/Weight: 82x45x21mm/120g
● 1 X 10A Waterproof Solar Charge Controller
● 1 X User Manual
Make sure this fits by entering your model number.
IP68 Rated (waterproof) Suitable for Outdoor Use. Intelligent 4-stage PWM charging.
Short circuit protection, over charge protection, over discharge protection, over load protection, reverse protection. working mode is light control mode.
Maintains batteries and extends battery life. Automatically senses 12 or 24 Volt batteries.
Includes cables for attaching solar panel, battery, and load, 3 LED’s lights provide solar charging status, battery level, and load status.
Compact size: Easy to mount directly to the frame of solar panel, with heat sink and 2pcs mounting holes.